Mini SAM M4

$30.00

Mini SAM M4 is a minifigure-sized development board based on the Microchip SAMD51G 48-Pin 32-Bit ARM® Cortex®-M4F MCU running at 120Mhz with 18 I/O, two built-in LEDs, built-in Button, and an extra 2MB of memory.

SKU: 1001 Category:

Description

Mini SAM M4 is a minifigure-sized development board based on the Microchip SAMD51G 48-Pin 32-Bit ARM® Cortex®-M4F MCU  running at 120Mhz with 18 I/O, two built-in LEDs, built-in Button, and an extra 2MB of memory.

Board Features

I/O

The boards includes a micro USB interface for programming and power. Around the edge are 0.050″ spaced holes.  The board has the following I/O pins available:

  • UART
  • SPI
  • I2C
  • SWD
  • 7 Analog In Capable Pins
  • 2 Analog Out Capable Pins
  • 18 Digital In/Out Capable Pins

The Mini SAM boards include two LED indicators; a standard builtin LED and an APA102 RGB LED. There are two built-in buttons as well; a RESET button and a user programmable BUTTON.

Memory

In order to support CircuitPython, a 2MB Quad-SPI flash memory chip is included. This provides plenty of space for the CircuitPython program as well as space for user programming and libraries.

Power

The boards include a 600mA 3.3V regulator, more than enough to power this little board and its built-in features. The board can be powered from a micro-USB or a battery connected to the BAT pin – it will automatically switch between the two.

CircuitPython

The board comes pre-loaded with the latest available CircuitPython when produced.  Please check for a new version here.

The board also comes with a UF2 bootloader, or if you need it be built from this source: UF2-SAMDX1

For more information and help with the board, please see the help page.

Additional information

Weight 0.1 kg
Dimensions 25 × 16 × 5 cm
Color

Blue, Green, Matte Black, Purple, Red

Reviews

There are no reviews yet.

Be the first to review “Mini SAM M4”

Your email address will not be published. Required fields are marked *