Mini SAM M4
Mini SAM M4
Mini SAM M4
Mini SAM M4
Mini SAM M4
  • Load image into Gallery viewer, Mini SAM M4
  • Load image into Gallery viewer, Mini SAM M4
  • Load image into Gallery viewer, Mini SAM M4
  • Load image into Gallery viewer, Mini SAM M4
  • Load image into Gallery viewer, Mini SAM M4

Mini SAM M4

Regular price
$30.00
Sale price
$30.00
Regular price
$0.00
Sold out
Unit price
per 

Mini SAM M4 is a minifigure-sized development board based on the Microchip SAMD51G 48-Pin 32-Bit ARM® Cortex®-M4F MCU  running at 120Mhz with 18 I/O, two built-in LEDs, built-in Button, and an extra 2MB of memory.

Board Features

I/O

The boards includes a micro USB interface for programming and power. Around the edge are 0.050″ spaced holes.  The board has the following I/O pins available:

  • UART
  • SPI
  • I2C
  • SWD
  • 7 Analog In Capable Pins
  • 2 Analog Out Capable Pins
  • 18 Digital In/Out Capable Pins

The Mini SAM boards include two LED indicators; a standard builtin LED and an APA102 RGB LED. There are two built-in buttons as well; a RESET button and a user programmable BUTTON.

Memory

In order to support CircuitPython, a 2MB Quad-SPI flash memory chip is included. This provides plenty of space for the CircuitPython program as well as space for user programming and libraries.

Power

The boards include a 600mA 3.3V regulator, more than enough to power this little board and its built-in features. The board can be powered from a micro-USB or a battery connected to the BAT pin – it will automatically switch between the two.

CircuitPython

The board comes pre-loaded with the latest available CircuitPython when produced.  Please check for a new version here.

The board also comes with a UF2 bootloader, or if you need it be built from this source: UF2-SAMDX1

For more information and help with the board, please see the help page.